
ServicesScreen Cleaning & Repair
Window Screen Cleaning & Repair in Seabrook Island
Dirty screens make freshly cleaned glass look dull, and torn mesh lets bugs in. We take your screens down, wash them by hand, fix torn mesh and loose frames, and put everything back so each one fits snugly and opens the way it should.
Screens that let the light and breeze through
Screens catch everything the air carries: pollen, dust, cobwebs and, near the coast, a fine film of salt. After a season or two the mesh turns gray and you see the haze every time you look out. Washing the glass alone will not fix that view. The screen has to come off and get cleaned too.
Repair is the other half of the job. Fiberglass mesh sags and tears with age, and aluminum frames bend or lose their corner pieces. We clean the screens that only need cleaning and fix the ones that need fixing, and we tell you which is which before we start.
We also pay attention to how screens come out. Building codes expect bedroom windows to work as a way out of the house in a fire, so a screen there should still release by hand without tools. If we find one screwed or painted shut, we point it out and can set it up to come out easily.
What our screen work covers
Careful removal and labeling
We take each screen out by hand and mark which window it belongs to. Screens that look alike often differ by a fraction of an inch, so labeling keeps every one going back where it fits.
Hand washing both sides
We use a soft brush and mild soap, then rinse with low pressure. High pressure can stretch fiberglass mesh or pop it out of the spline, so we skip it.
Mesh replacement
Torn, sagging or brittle mesh is cut out and replaced with new mesh rolled in with fresh spline. We can match standard fiberglass or aluminum, or use pet-resistant mesh if you ask.
Frame and hardware fixes
We straighten mildly bent frames and replace cracked corner keys, pull tabs and spring clips. A frame too damaged to trust is something we will tell you plainly about rather than patch.
Fit check on reinstall
Every screen goes back in and gets a check for gaps along the edges, which is where bugs slip through.
Signs your screens need attention
A gray haze on the view
If clean glass still looks cloudy from inside, the screen is usually the cause. Pollen and salt build up in the weave and soften the light.
Small tears or pulled corners
A rip the size of a fingertip is enough for mosquitoes. Tears also spread once the mesh starts to loosen.
Mesh that bows or sags
Sagging means the spline has shrunk or the mesh has stretched. It rarely tightens back up on its own.
Screens that rattle or fall out
Missing clips, worn tabs or a bent frame leave a screen loose in the opening. Wind can knock it out entirely.
White crust or pitting on frames
Salt air corrodes aluminum over time. Cleaning slows that down, and badly pitted parts can be replaced.
How a screen visit goes
- 1
A quick talk by phone
You let us know roughly how many screens you have and what is wrong with them, such as dirt, tears or loose frames. We go over pricing on the call and pick a day and time that works for you.
- 2
Walk-around and honest notes
When we arrive, we look over every screen with you before touching anything. If one needs new mesh or a new frame part, we say so and confirm the cost first.
- 3
Cleaning and repairs
We wash screens outside on a clean drop cloth and rescreen any that need it. Most mesh repairs happen right there, so the screens do not leave your property.
- 4
Reinstall and tidy up
Screens go back in their labeled windows, we check the fit, and we pick up old mesh, spline scraps and drop cloths before we leave.
What moves the price of screen work
Two things set most of the price: the count of screens and the work each one needs. A wash is the lightest job, new mesh comes next, and rebuilding a frame takes the most time. Every line on your quote is explained, so you know what you are paying for before we begin.
- Screen count and size
- Each extra screen adds handling time. Large screens for patio doors or picture windows need more care to move and clean without bending.
- Wash only or rescreen
- A screen that just needs washing goes quickly. Rescreening means cutting out the old mesh, rolling in new mesh and spline, and taking time to get it tight.
- Choice of mesh
- Standard fiberglass is the lowest-cost material. Aluminum and pet-resistant mesh cost more per screen.
- Frame condition and reach
- Bent frames, missing clips or tabs, and second-story screens that call for a ladder all add time to the visit.
Screen cleaning and repair questions
Something not covered here? (843) 917-6837
Do I need a permit for screen repair?
No. Cleaning screens and replacing mesh or hardware is routine upkeep and does not need a building permit. What does matter is that bedroom windows meant as a second way out of the house stay easy to open, so we keep those screens removable by hand. If your community has rules about screen color or style, check them before choosing a new mesh.
Can you fix a torn screen or does it need replacing?
Most torn screens just need new mesh in the existing frame, which we do on site. A whole new screen only makes sense when the frame is badly bent, cracked or corroded. We show you the damage and give you the choice.
Will cleaning damage older screens?
We use soft brushes, mild soap and a gentle rinse, which is safe for screens in fair shape. Very brittle mesh can split when handled at all. If we see that, we tell you before washing so you can decide whether to rescreen instead.
Should I have my screens done along with window cleaning?
It usually works out well, since the screens are already coming off for residential window cleaning. Clean glass behind a dirty screen still looks hazy, so doing both together gives you the full view. Many people add window track and sill cleaning at the same visit too.
What kind of mesh do you use?
Standard fiberglass mesh covers most homes and holds up well in humid air. We also offer aluminum mesh and heavier pet-resistant mesh if a dog or cat tends to push on the screens. We can talk through the options on the phone.

Ready for clean, snug screens
Give us a rough count of your screens and tell us what you have noticed, like dirt, tears or a loose fit. We will lay out the options and go over your quote by phone.